The PHANTOM 60 is a sliding rotary pump and will pump any liquid be it low or high viscosity with maximum volumetric efficiency. Chemical compatibility presents very few problems as our modular design allows maximum flexibility in combining pumping elements of correct materials specifications to suit your specific duty requirements.
|Capacity:||550L/ Min (121 IGPM) at 750 RPM|
|Pressure:||Maximum differential pressure 10 BAR (150 PSI)|
|Temperature:||-30°C to + 250°C|
|Viscosity:||Up to 100,000 Centistokes|
|Construction:||Cast Iron. S.G. Iron, Stainless Steel, Bronze, Ni-Resist, Cast Steel, Nickel Alloy, Aluminium Bronze, Monel Hastalloy, Hygieniic Constuction.|
|Model Options:||*Basic model comprises – Single Seal Design with Basic Pressure Relief Valve
Standard Model comprises – Two Mechanical Seals with Silicon Carbide wear plates and hygienic adjustable pressure relief valve.
Turbo Model comprises – as standard but additional features of varying vacuum capabilities dependent upon design and various Pressure
|Pressure Relief Valve:||Relief Valve options (Special orders will be made to suit your requirements.
Basic or Standard Hygienic
Mechanical Seal Arrangement
Packed Gland Seal Arrangement
Phantom 60 is self priming positive displacements pump of a rotary sliding vane design. Each revolution will discharge a fixed volume.
As the rotor turns, the fluid is moved from the suction port to the discharge by the vanes which slide within the rotor. The force acting on the vanes are
- Hydraulic pressure behind the vane.
- Locating Rings (Standard Design) or Push Rods (Turbo Design)
- Centrifugal force.
Integral Pressure Relief Valve – Hygienic design (on all Standard and Turbo models)
PHANTOM 60 Maintains High Efficiency throughout services. Internal pump slip is reduced to a minimum as the vanes wear, they simply move out of the slots, maintaining the same fine clearance against the body. Therefore suction capability and discharge capability is unimpaired even after arduous services.
|Glucose*:||880 – 22.000 CS|
|Sulphuric Acid:||14.6 CS|
|SAE 40 Oil*:||15 – 210 CS|
|Fuel Oils*:||2 – 660 CS|
|Corn Oil:||8 – 29 CS|
|Sugar 62 Brix*:||216 at 70°F|
|Corn Starch 24 Baume*:||130 at 70°F|
|*Viscosities Dependant on Temperature|
- 1 Poise = 100 Centipoise (CP) (Dynamic)
- 1 Stoke = 100 Centipoise (CS) (Kinematic)
- Poise = Stoke x Products Specific Gravity
- SSU = Poise x 455 (Approx)
- SSU = Centistokes x 4.635 (for value over 70 CSI)
|Model||Pump Size||Imp Gal per rev. Theoretical||Lt.per rev Theoretical||Max Rpm||Imp. GPM M Maximum||Lt/Min Maximum|
|1 IMP GAL = 1.20 US GAL = 4.546 LITRE||1cm³ = 0.06 IN3||1 lb/ft = 1.36 Nm|
|1 m³ = 219.9 GAL IMP = 35.31 cu ft||1HP = 0.745 Kw||1 k = Kg = 20.205lb|
|KW = (TORQUE Nm x RPM) / 9550||bhp = (G.P.M x P.S.I) / (1428 x Efficiency)||Head in ft = (Head in P.S.I x 2.31) / S.G|